Auto Console Mold
Auto console / console button / air-condition mold Capability Auto console mold Auto console button mold Auto air-condition mold Auto console related parts are precision injection molded and require high precision equipment for machining and injection molding. Meetmoulds have many good partners...
Auto console / console button / air-condition mold
Auto console mold
Auto console button mold
Auto air-condition mold
Auto console related parts are precision injection molded and require high precision equipment for machining and injection molding.
Meetmoulds have many good partners in China, Who can do a good job for this kind of injection mold.
Such like Auto console related button, Housing, Auto air conditioner etc. Even the part is small, but the structure is complex also, many sliders and lifters, and tight tolerance for assembly(±0.02mm), Reasonable gate location and uniform cooling lines is important.
Many thin ribs need to make inserts to insure the machining and polishing.
The characteristics for this kind of mold:
1, Mold size is small but high requirement for both dimensions and appearance.
2, Need precision mamufacturing equipment to insure the machining process.
3, Inspection and assembly is important.
4, most of parts are textured or electroplated after molding.
5, complex mold structure and precision sliders and lifters.
6, Maybe many precision inserts must be made for machining and rib's full filling.
Professional CAE analysis to decide the gate quantity and location, The gate location is very important for this kind of part
Meetmoulds have rich experience to make the best decision for runner and gates. Balance the flowing and eliminate welding line
Evaluate the packing for pressure and clamping force. Indicate potential air traps and warpage.
Good vents for periphery parting line and make venting inserts for potential air trap area. Add vents for welding line area.
Cooling must be sufficient to any molding area, Putting water lines on ejection blocks, inserts, lifters, any of molding inserts
Precise calculation for each water lines efficiency, overall cooling balance, Uniform cooling and high efficiency.
Using large lifters to release undercut,with detailed water lines, together with pins,stripper blocks to successfully eject out the part, Early prevention to stop any sticking risk to lifters, part can be easily fetched out by robot.
Cavity steel is usually imported 2738 HRC30-33 hardness, Core steel is usually 718H from Baosteel supplier, Hardness is HRC34-36
No rough surface cutting and welding allowed, Dimension tolerance is important, So it is required precision machining