Small Household Appliance Mold
Small household appliance mold Capability Air cleaner mold Drying cupboard mold Vacuum cleaner mold Smart sweeper mold Coffee maker mold Meetmoulds has rich experience in many other small household applicance product, such as Air cleaner/Drying machine/ Coffee maker/dish-washing machine/ Vacuum...
Small household appliance mold
Air cleaner mold
Drying cupboard mold
Vacuum cleaner mold
Smart sweeper mold
Coffee maker mold
Meetmoulds has rich experience in many other small household applicance product, such as Air cleaner/Drying machine/ Coffee maker/dish-washing machine/ Vacuum cleaner/ speaker etc. The raw material is usually ABS or PC/ABS etc, The surface finishing is usually SPI A1 mirror. So improvement of part and mold design experience is important to get a beautiful part after molding, and rich experience will be required for mold manufacturing supplier. In Meetmoulds, You will get a one-stop solution to reduce risk and achieve win-win situation.
The mold design usually take 1 week to finish, The schedule is short for this household applicances mold, because Home appliance manufacturers need to seize market time and capture the market opportunities.
The characteristics for such kind small household product mold:
1, Runner and gate location is important, to get beautiful appearance samples.
2, mold structure is complex to meet functional requirements of the product.
3, Many complicated sliders and lifters or Double sliders lifters will be required to release undercuts.
4, Stable mold structure to ensure mass production.
5, Many other plastic parts are assembled to them, So the warpage and dimensions control is very important.
6, Polishing or texture is very import to get a perfect plastic samples, Many parts are SPI A1 mirror finishing.
7, Steam heated or electrical heating rods to be used for high-gloss finishing. Eliminate the ugly welding lines when injection.
Professional CAE analysis to decide the gate quantity and location, The gate location is very important for this kind of part
Meetmoulds have rich experience to make the best decision for runner and gates. Balance the flowing and eliminate welding line
Evaluate the packing for pressure and clamping force. Indicate potential air traps and warpage.
Many complex sliders and lifters will be needed to release the undercut, But our design is stable enough to ensure the mass production.
Cooling must be sufficient to any molding area, Putting water lines on ejection blocks, inserts, lifters, any of molding inserts
Precise calculation for each water lines efficiency, overall cooling balance, Uniform cooling and high efficiency.
Using complicated slides to release undercut, with detailed water lines, together with pins, stripper blocks to successfully eject out the part, Early prevention to stop any sticking risk to slides, part can be easily fetched out by robot.
Cavity steel is usually imported 2738 HRC30-33 hardness or CENA1 NAK80 to meet high-gloss finishing requirement, Core steel is usually 718H from Baosteel supplier, Hardness is HRC34-36.
No rough surface cutting and welding allowed, The insert shape is hard to machine accurately, and assembly also need rich experience