TV mold Capability TV front cover mold TV back cover mold TV base mold TV frame Mold TV decorative strip mold TV mold is one of the most common Black household electrical appliances mold, which has higher requirements for molding process, perfect cosmetic requirement, Front Cover/Back...
TV front cover mold
TV back cover mold
TV base mold
TV frame Mold
TV decorative strip mold
TV mold is one of the most common Black household electrical appliances mold, which has higher requirements for molding process, perfect cosmetic requirement, Front Cover/Back Cover/Base/Frame are the main TV plastic parts. Meetmoulds has rich experience in TV products improvement and professtional mold design, The raw material is usually ABS or PC/ABS etc, The surface finishing is usually SPI A1 mirror. So improvement of part and mold design experience is important to get a beautiful part after molding, and rich experience will be required for mold manufacturing supplier. In Meetmoulds, You will get a one-stop solution to reduce risk and achieve win-win situation.
The mold design usually take 1 week to finish, The schedule is short for this household applicances mold, because Home appliance manufacturers need to seize market time and capture the market opportunities.
The characteristics for such kind Fridge product mold:
1, Runner and gate location is important, to get beautiful appearance samples.
2, mold structure is complex to meet functional requirements of the product.
3, Many lifters for the front cover part. And many heat radiation through holes on Back cover part.
4, Stable mold structure to ensure mass production.
5, Many other plastic parts are assembled to them, So the warpage and dimensions control is very important.
6, Polishing or texture is very import to get a perfect plastic samples, Many parts are SPI A1 mirror finishing.
7, Steam heated or electrical heating rods to be used for high-gloss finishing.
Professional CAE analysis to decide the gate quantity and location, The gate location is very important for this kind of part
Meetmoulds have rich experience to make the best decision for runner and gates. Balance the flowing and eliminate welding line
Evaluate the packing for pressure and clamping force. Indicate potential air traps and warpage.
Many hot tips from core side, and make small inserts for critical dimensions. Many lifters to release undercut.
Cooling must be sufficient to any molding area, Putting water lines on ejection blocks, inserts, lifters, any of molding inserts
Precise calculation for each water lines efficiency, overall cooling balance, Uniform cooling and high efficiency.
Using complicated lifters to release undercut, with detailed water lines, together with pins, to successfully eject out the part, part can be easily fetched out by robot.
Core steel is usually imported 2738 HRC30-33 hardness, Cavity steel is usually CENA1 or NAK80 imported steel, Hardness is HRC40-42.
No rough surface cutting and welding allowed, The insert shape is hard to machine accurately, and assembly also need rich experience